Classroom flooring
A multi-use flooring which is installed in commercial spaces including lifelike classroom, sports center and gallery etc.
Total 1 thing, 1 / 1 page
- Flooring Material
- Classroom Flooring
- HPL Flooring
A multi-use flooring for well-being life which provides tonic for commercial stores including lifelike classroom, sport center and gallery.
- Multi-use HPL flooring
- Eco-friendly certified product
- Moisture resistant flooring
- High-class flooring
- Realization of customer satisfaction
-
Multi-use HPL flooring
-
Excellent wear resistance, scratch resistance and contamination resistance through high pressure laminate (HPL).
-
Eco-friendly certified product
-
Safe in formaldehyde, TVOC (Total Volatile Organic Compounds) and toluene.
-
Moisture resistant flooring
-
The 1st class waterproof plywood, which is made of tropical solid wood, has been used therefore dimensional stability, which is excellent for water leak and moisture, has been secured.
-
High-class flooring
-
Texture like natural solid wood has been expressed.
-
Realization of customer satisfaction
-
KS certified product that customer satisfaction is realized through complete production management and securement of post management.
-
Structural Map
-
[Product specifications and packing unit]
Sizes 1200 x 140 x 15 (T) 1200 x 140 x 12 (T) Installation Non-adhesive / adhesive Construction Packing Unit 12Pcs (15T) / Box (2.016㎡) 15Pcs (12T) / Box (2.52㎡) Usage Classroom, store (commercial)
-
Performance Standard (KSF3126)
-
Test item Quality standard Test method Flexural strength 40N/mm2 or more However, in the case of a product with a thickness of 10mm or less, this may be omitted. KS F 3126 8.2 Wet flexural strength 20N/mm2 or more However, in the case of a product with a thickness of 10mm or less, this may be omitted. KS F 3126 8.3 Flat Tensile Strength Not less than 0.4 N/mm KS F 3126 8.4 Abrasion resistance Abrasion degree : More than 3000 revolutions KS F 3126 8.5.1 Shock resistance No radioactive cracking, destruction, or exfoliation of the decorative material KS F 3126 8.8 Scratch resistance 3N or greater threading hardness. KS F 3126 8.9 Contamination resistance No color left on the surface of the test specimen KS F 3126 8.10 Endocyretic properties Grade 3 or higher KS F 3126 8.11 Internal degeneration Front side: There shall be no cracks or other defects on the surface. Color difference: Standard gray color table No. 5 or above or color difference no. 3.0 or below KS F 3126 8.12.1 Formaldehyde The amount of radiation E0 :Average of 0.5 mg/L or less, maximum of 0.7 mg/L or less KS F 3126 8.13 Adhesive In the veneer core hop plate or special core plywood having parallel fiber directions of adjacent veneers, the length of the part not peeled off to the same adhesive layer in the water immersion peeling test is 50 mm or more on each side. KS F 3126 8.14 Water content 13% or less KS F 3126 8.15